Precaution

Even within the centrifuge drum parts are used as corrosion-resistant material (such as stainless steel); If for various reasons can not or will not allow this use, should be used in corrosion-resistant lining inside the centrifuge, spray plastic.

Regular checks of the centrifuge drum and other important parts of the corrosion, if it is found severe corrosion should be repaired or replaced; case should be of high quality steel or stainless steel, and to ensure that its manufacturing quality.

Centrifuge maintenance and repair

Good maintenance and repair of the centrifuge is an important guarantee for its safe operation of the centrifuge run should be 700 to 1400 hours after minor repairs; running from 3000 to 4000 hours after the repair; when the drum shaft damage or corrosion, rim fracture or with loose wheel and drum shell when it should be a major overhaul. General minor repairs to clean the bearing components, make up for screen, tighten all bolts. In centrifuge repair, replace screen, brake band, check the bearings, replace the rubber shock absorbers. Centrifuge is fully washable inspection overhaul replacement rehabilitated.